Dr. Erica Lilleodden
Dr. Erica Lilleodden
Experimental Materials Mechanics
AbteilungsleiterinTel: +49 (0)4152 87-2550
Fax: +49 (0)4152 87-2625
Education
2002 Ph.D., Stanford University, Department of Materials Science & Engineering, Thesis: Indentation-‐induced plasticity of thin metal films, Advisor: W.D. Nix
1996 Bachelors of Materials Science, University of Minnesota -‐ Twin Cities
Research Experience
2014 – present Professor for Experimental Nano-‐ und Micromechanics, Institute of Advanced Ceramics, Hamburg University of Technology
2010 – present Department Head, Department of Experimental Materials Mechanics, Institute of Materials Research, Materials Mechanics, Helmholtz-‐Zentrum Geesthacht
2006 – 2010 Group Leader, Nano and Micromechanics; Institute of Materials Research, GKSS Research Center (now Helmholtz-‐Zentrum Geesthacht)
2004 – 2006 Guest Scientist & Humboldt Fellow, Institute for Materials Research, Forschungszentrum Karlsruhe (now Karlsruhe Institute of Technology) Advisors: Oliver Kraft and Cynthia Volkert
2001 – 2004 Post-Doctoral Fellow, Lawrence Berkeley National Laboratory (LBL) Advisor: Prof. J.W. Morris, Jr.
2000 Visiting Student, Sandia National Laboratory (SNL) Advisor: Dr. Stephen Foiles
1996 – 2001 Graduate Research Assistant, Stanford University, Department of Materials Science & Engineering Advisor: W.D. Nix, Thesis: Indentation-‐induced plasticity of thin metal films
1996 – 2001 Undergraduate Research Assistant, University of Minnesota -‐ Twin Cities, Department of Chemical Engineering & Materials Science Advisor: W.W. Gerberich, topic: Development of nanoindentation methods, in conjunction with Hysitron, Inc.
Grants & Funding
2016 – present Sonderforschungsbereich 986, Phase 2: “Maßgeschneiderte multiskalige materialsysteme M3“: Teilprojektleiterin (Erstantragsteller), Teilprojekt B4 “Mikromechanisches Materialverhalten hierarchischer Werkstoffe“; Teilprojekt B8 „Mikromechanisch-‐elektrochemische Kopplung von nanostrukturierten Metallen beschichtet mit leitfähigem Polymer“. Funding: 680 T€ (2016-‐2020)
2012 Awarded as a top female researcher by the Helmholtz Initiative and Networking Fund. Funding: 750 T€ available to support a W2 Professorship
2012 – 2016 Sonderforschungsbereich 986, Phase 1: “Maßgeschneiderte multiskalige materialsysteme M3“: Teilprojektleiterin (Erstantragsteller), Teilprojekt B4 “Mikromechanisches Materialverhalten hierarchischer Werkstoffe“. Funding: 450 T€ (2012-‐16)
2006 – present As a member of the Helmholtz Gemeinschaft, Helmholtz-‐Zentrum Geesthacht is financed largely through “Programmorientierte Förderung”, a competitive application process in which I am actively involved as Principle Investigator and Spokesperson of Subtopic “Fundamentals of deformation, damage and fracture”. Annual funding: 890 T€ (2010-‐2014)
2005 – 2006 Humboldt Fellowship: “Deformation behavior of nanoporous materials” Hosts: Oliver Kraft & Cynthia Volkert, Forschungszentrum Karlsruhe
Awards and Professional Activities
2016 Chair of the 2016 Gordon Research Conference on Thin Film & Small Scale Mechanical Behavior
2016 External expert, Ph.D. Exam of Saba Zabihzadeh, “Deformation behavior of nanoporous nanocrystalline silver layers sintered by low temperature bonding: experiment and simulation”, Institute of Materials at Ecole Fédérale de Lausanne (EPFL)
2009 – 2014 DGM Work Group Leader: “Mechanical characterization in small volumes”
2013 External expert, Ph.D. Exam of Cécile Marichal, “Plasticity in bcc single crystals investigated by Laue diffraction during microcompression”, Institute of Materials at Ecole Fédérale de Lausanne (EPFL)
2013 Shortlisted for Full Professor (W3) in Materials Physics in the Faculty of Georesources & Materials Engineering, RWTH Aachen, successor to Prof. Gottstein; Head of the Search Committee: Prof. J. Schneider
2013 Shortlisted for Full Professor (W3) in the Chair for Materials Science (Lehrstuhl für Werkstoffkunde), Universität Paderborn, successor to Prof. Maier; Head of the Search Committee: Prof. J. Vrabec
2012 Elected Chair of the 2016 (and Co-‐chair of 2014) Gordon Research Conference on Thin Films & Small Scale Mechanical Behavior
2009 – 2012 Associate Editor, Experimental Mechanics
2011 Co-organizer: "Size Effects in Mechanical Behavior", symposium at the 2011 TMS Annual Meeting & Exhibition
2010 – 2011 Principle Editor, Journal of Materials Research
2009 – 2010 Co-‐organizer and Proceedings Editor: “Mechanical behavior of nanomaterials -‐ experiments and modeling”, symposium at the MRS Fall Meeting 2009
2007 – 2010 Helmholtz-‐Akademie für Führungskräfte, Malik-‐Management MZSG, St. Gallen, Switzerland
2008 Co-organizer: “Emerging methods to understand mechanical behavior” symposium at the 2008 TMS Annual Meeting
2007 Organizing Committee: “Nanomech 8”, Hückelhoven, Germany
2006 Lead organizer: “Size effects in the deformation of materials: experiments and modeling”, symposium at the MRS Fall Meeting 2006
2005 Humboldt Fellowship recipient
2005 Co-‐organizer: “Mechanical properties of nanostructured materials -‐ experiments and modeling”, MRS Spring Meeting 2005
2004 Co-‐organizer: “Nanomechanics of materials” symposium at the APS Annual Meeting, Montreal, Canada
2003 – present Member, TMS committees “Mechanical behavior of materials” and “Nanomechanical material behavior”
2002 – present Reviewer for scientific journals, including Science, Nature, Nature Materials, Nano Letters, Journal of Mechanics & Physics of Solids, Acta Materialia, Scripta Materialia, Journal of Materials Research, Philosophical Magazine
Teaching Experience
2016 – present Lecturer: “Dislocation Theory of Plasticity” Master’s in Materials Science, 2nd semester with ca. 30 students, Hamburg University of Technology
2016 – present Lecturer: “Experimental Micromechanics” Master’s in Materials Science, 2nd semester with ca. 10 students, Hamburg University of Technology
2016 – present Lecturer: “Fundamentals of Mechanical Properties of Materials” Bachelor’s Mechanical Engineering, 6th semester with ca. 80 students, Hamburg University of Technology
2014 Lecturer: Workshop on Nanomechanics, CRANN, Trinity College, Dublin, Ireland
2014 Lecturer: Ecole thématique CNRS / Gradschool -‐ SOLID MECHANICS FOR NANOSCIENTISTS
2010 Lecturer: VI-‐IPSUS Summer School 2010, GKSS Research Center
2009 Lecturer: International Summer School on Micro-‐Mechanical Experiments, Erich Schmid Institute of Materials Science, Leoben, Austria
2008 Tutorial Instructor, “Nanoindentation-‐based techniques” at the 2008 TMS Annual Meeting
2004 Co-‐taught short course on scanning probe microscopies, in collaboration with Pacific Nanotechnologies, Inc. at the Scanning 2004 Annual Meeting, Washington, D.C., USA
2003 – 2004 Lecturer, Undergraduate Course: “Metals Processing”, Department of Materials Science and Engineering, University of California Berkeley, USA
2002 Lecturer: “Dislocation Plasticity”, Graduate Course in Department of Materials Science and Engineering, University of California Berkeley, USA
Advised Students
2014 – present Ph.D. Candidate, Julian Sabisch, Topic: Twinning mechanisms in Mg and Mg alloys
2014 – present Ph.D. Candidate, Camila Mallmann, Topic: Micromechanical behaviour of Mg nanocomposites
2012 – present Ph.D Candidate, Hu Kaixiong, Topic: Micromechanical and Three-‐Dimensional Microstructural Characterization of Nanoporous Gold-‐Epoxy Composites
2011 –2015 Ph.D., Henry Ovri, Topic: Microstructural influences on plastic instabilities in AA 2198
2009 – 2013 Ph.D., Daniel Kupka, Thesis: Fracture experiments of single grain boundaries in ductile metals
2009 – 2011 Ph.D., Gyu Seok Kim, Thesis: Small volume investigation of slip and twinning in magnesium single crystals
2010 Master’s, Henry Ovri, Thesis: Nanomechanical investigation of pure Mg and Mg AZ31
2009 Master’s, Paula Guglielmi, Thesis: Mechanical characterization of PEG hydrogels through nanoindentation
2009 Master’s, Julia Hapke, Thesis: SEM-‐Microanalysis of compressive failure in UD-‐ CFRP
Invited Talks
2016 Plenary Speaker, SIAM Conference on Mathematical Aspects of Materials Science, Philidelphia, USA
2016 Invited Speaker, 2016 Spring Meeting of the Materials Research Society, Phoenix, USA
2015 Invited Speaker, 2015 Fall Meeting of the Materials Research Society, Boston, USA
2015 Invited Speaker, 2015 International Materials Research Congress, Cancun, Mexico
2014 Invited Speaker, Robert B. Sosman Award Symposium: Opportunities for Enhancement of Nanomechanical Properties of Materials, Materials Science & Technology 2014, Pittsburgh, USA
2014 Invited Speaker, New Frontiers of Nanometals, 35th Risø International Symposium on Materials Science, Roskilde, Denmark
2014 Plenary Speaker, 14th European Mechanics of Materials Conference, Gothenburg, Sweden
2013 Invited Speaker, ECI Conference on Nanomechanical Testing in Materials Research and Development IV, Algarve, Portugal
2013 Invited Speaker, European Agilent User Meeting on Nanoindentation, Rome, Italy
2013 Keynote speaker, Symposium on “Fatigue and Fracture of Thin Films and Nanomaterials” at the 2013 TMS Annual Meeting
2012 Invited Speaker, Gordon Research Conference on Thin Film & Small Scale Mechanical Behavior, Waterville, Maine, USA
2012 Keynote Speaker, ESMC 2012, Graz, Austria
2011 Keynote Speaker, Plasticity 2011, Puerto Vallarta, Mexico
2007 Keynote Speaker (Hauptvortrag), DPG Annual Conference, Regensburg, Germany
2007 Invited Speaker, Plasticité 2007, Poitiers, France
2006 Invited Speaker, Local Mechanical Stresses and Microdiffraction Workshop, Grenoble, France
2006 Introductory Meeting of the Alexander von Humboldt Foundation, Erlangen, Germany
2005 Invited Speaker, Opening Ceremony of the Nordic Laboratory, Helsinki University of Technology, Helsinki, Finland
2003 Invited Speaker, Symposia on scanning probe techniques, sponsored by Pacific Nanotechnologies, Inc. (Santa Clara, CA), Tokyo and Osaka, Japan
2000 Invited Speaker, Symposium on Nanomechanics, sponsored by Hysitron, Inc. (Minneapolis, MN), Sao Paolo, Brazil
Peer Reviewed Journals
- K. Hu, M. Ziehmer, K. Wang, E.T. Lilleodden, “Nanoporous gold: 3D structural analyses of representative volumes and their implications on scaling relations of mechanical behaviour”, Philosophical Magazine (2016) ACCEPTED.
- J.J. do Rosário, J. Berger, E.T. Lilleodden, R.M. McMeeking, G.A. Schneider, “The stiffness and strength of metamaterials based on the inverse opal architecture”, Extreme Mechanics Letters (2016) ACCEPTED.
- N. Mameka, K. Wang, J. Markmann, E.T. Lilleodden, J. Weissmüller, “Nanoporous Gold— Testing Macro-‐scale Samples to Probe Small-‐scale Mechanical Behavior”, Materials Research Letters vol. 4 (2016) 27-‐36.
- L. Wang, J. Sabisch, E.T. Lilleodden, Kink formation and concomitant twin nucleation in Mg– Y, Scripta Materialia vol. 111 (2016) 68-‐71.
- T.I.W. Schnoor, U. Vainio, L.H. Shao, E.T. Lilleodden, M. Müller, A. Schreyer, K. Schulte, B. Fiedler, “Nanostructured MWCNT/Polypyrrole Actuators with Anisotropic Strain Response”, Advanced Engineering Materials vol. 18 (2016) 597–607.
- J.J. do Rosário, E.T. Lilleodden, M. Waleczek, R. Kubrin, A.Y. Petrov, P.N. Dyachenko, J.E.C. Sabisch et al. "Self-‐Assembled Ultra High Strength, Ultra Stiff Mechanical Metamaterials Based on Inverse Opals", Advanced Engineering Materials vol. 17 (2015) 1420-‐1424
- H. Ovri, E.A. Jägle, A. Stark, A., E.T. Lilleodden, “Microstructural influences on strengthening in a naturally aged and overaged Al–Cu–Li–Mg based alloy”, Materials Science and Engineering: A, vol. 637 (2015) pp. 162-‐169.
- H. Ovri, E.T. Lilleodden, “New insights into plastic instability in precipitation strengthened Al–Li alloys”, Acta Materialia vol. 89 (2015) pp. 88-‐97.
- P.O. Guglielmi, E. G. Herbert, L. Tartivel, M. Behl, A. Lendlein, N. Huber, and E. T. Lilleodden. “Mechanical characterization of oligo (ethylene glycol)-‐based hydrogels by dynamic nanoindentation experiments", Journal of the mechanical behavior of biomedical materials vol. 46 (2015) pp. 1-‐10.
- Ulla Vainio, Thea I. W. Schnoor, Sarathlal Koyiloth Vayalil, Karl Schulte, Martin Mueller, and Erica T. Lilleodden, "Orientation Distribution of Vertically Aligned Multi-‐Walled Carbon Nanotubes”, Journal of Physical Chemistry C, vol. 118 (2014) pp 9507–9513.
- E. Husser, E. T. Lilleodden, S. Bargmann, “Computational modeling of intrinsically induced strain gradients during compression of c-‐axis-‐oriented magnesium single crystal”, Acta Materialia, vol. 71 (2014) pp. 206–219.
- J. Hütsch, E.T. Lilleodden, “The influence of focused-‐ion beam preparation technique on microcompression investigations: lathe vs. annular milling”, Scripta Materialia, vol. 77 (2014) pp. 49–51.
- D. Kupka, N. Huber, E.T. Lilleodden, “A combined experimental-‐numerical approach for elasto-‐plastic fracture of individual grain boundaries”, Journal of Mechanics and Physics of Solids, vol. 64 (2014) pp. 455–467.
- I. Knorr, N.M. Cordero, E.T. Lilleodden, C.A. Volkert, “Mechanical behavior of nanoscale Cu/PdSi multilayers”, Acta Materialia 61 (2013) pp. 4984–4995.
- G.M. Erickson, B. Krick, M. Hamilton, G.R. Bourne, M.A. Norell, E. Lilleodden, W.G. Sawyer, “Complex Dental structure and wear biomechanics in hadrosaurid dinosaurs” Science, vol. 338 (2012) pp. 98-‐101.
- S. Homaeigohar, J. Koll, E.T. Lilleodden, M. Elbahri, “The solvent induced interfiber adhesion and its influence on the mechanical and filtration properties of polyethersulfone electrospun nanofibrous microfiltration membranes”, Separation and Purification Technology, vol. 98 (2012) pp. 456–463.
- S. Bechtle, H. Özcoban, E.T. Lilleodden, N. Huber, A. Schreyer, J.A. Kieser, M.V. Swain, G.A. Schneider, “The hierarchical fracture properties of dental enamel”, J. Royal Society Interface, vol. 9 (2012) pp. 1265-‐1274.
- S. Bechtle, H. Özcoban, E.D. Yilmaz, T. Fett, G. Rizzi, E.T. Lilleodden, N. Huber, A. Schreyer, M.V. Swain, G.A. Schneider, “A method to determine site-‐specific, anisotropic fracture toughness in biological materials”, Scripta Materialia, vol. 66 (2012) pp. 515-‐518.
- D. Kupka, E.T. Lilleodden, “Mechanical Testing of Solid-‐Solid Interfaces at the Microscale”, Experimental Mechanics, vol. 52 (2012) pp. 649-‐658.
- J. Hapke, F. Gehrig, N. Huber, K. Schulte and E.T. Lilleodden, “Compressive failure of UD-CFRP containing void defects: In situ SEM microanalysis” Composite Science and Technology, vol. 71 (2011) pp. 1242–1249.
- E.T. Lilleodden, “Microcompression study of Mg (0 0 0 1) single crystal”, Scripta Materialia, vol. 62 (2010) pp. 532-‐535.
- A. A. Zbib, S. Dj. Mesarovic, E. T. Lilleodden, D. McClain, J. Jiao and D. F. Bahr, “The coordinated buckling of carbon nanotube turfs under uniform compression”, Nanotechnology vol. 19 (2008) pp. 175704 1-‐7.
- W. D. Nix, J. R. Greer, Gang Feng and Erica T. Lilleodden, “Deformation at the Nanometer and Micrometer Length Scales: Effects of Strain Gradients and Dislocation Starvation”, Thin Solid Films vol. 515 (2007) pp. 3152-‐3157.
- C.V. Volkert and E.T. Lilleodden, “Size Effects in the Deformation of Sub-‐Micron Au Pillars”, Philosophical Magazine vol. 86 (2006) pp. 5567-‐5579.
- C.V. Volkert, E.T. Lilleodden, D. Kramer and J. Wiessmuller, “Approaching the theoretical strength in nanoporous Au”, Applied Physics Letters vol. 89 (2006) pp. 061920-‐1-‐3.
- E.T. Lilleodden and W.D. Nix, “Microstructural Length-‐Scale Effects in the Nanoindentation Behavior of Thin Gold Films” Acta Materialia vol. 54 (2006) pp. 1583-‐1593.
- R. Maass, D. Grolimund, S. Van Petegem, M. Willimann, M. Jensen, H. Van Swygenhoven, T. Lehnert, M.A.M. Gijs, C.A. Volkert, E.T. Lilleodden, R. Schwaiger, “Defect structure in micropillars using x-‐ray microdiffraction”, Applied Physics Letters, vol.89 (2006) pp. 151905-‐ 1-‐3.
- A.M. Minor, E.T. Lilleodden, E.A. Stach and J.W. Morris, Jr., "Room temperature dislocation plasticity in silicon", Philosophical Magazine, vol. 85 (2005) pp. 323-‐330.
- A.M. Minor, E.T. Lilleodden, E.A. Stach and J.W. Morris, Jr., "Direct observations of incipient plasticity during nanoindentation of Al ", Journal of Materials Research, vol. 19 (2004) pp.176-‐182.
- E.T. Lilleodden, J.A. Zimmerman, S.M. Foiles and W.D. Nix, “Atomistic simulations of elastic deformation and dislocation nucleation during nanoindentation”, Journal of Mechanics and Physics of Solids, vol. 51 (2003) pp.901-‐920.
- A.M. Minor, E.T. Lilleodden, E.A. Stach and J.W. Morris, Jr., "In situ transmission electron microscopy study of the nanoindentation behavioir or Al", Journal of Electronic Materials vol. 31 (2002) pp. 958-‐964.
- A. Zagrebelny, E.T. Lilleodden, W.W. Gerberich and C.B. Carter, "Indentation of silicate-‐glass films on Al2O3 substrates", Journal of the American Ceramic Society, vol. 82 (1999) pp. 1803-‐1808.
- W.W. Gerberich, W. Yu, D. Kramer, A. Strojny, D. Bahr, E. Lilleodden and J. Nelson, “Elastic loading and elastoplastic unloading from nanometer level indentations for modulus determinations”, Journal of Materials Research, vol. 13 (1998) pp. 421-‐439.
- S.G. Corcoran, R.J. Colton, E.T. Lilleodden and W.W. Gerberich, “Anomalous plastic deformation at surfaces: nanoindentation of gold single crystals”, Physics Review B, vol. 55 (1997) pp. R16057-‐R16060.
- W.W. Gerberich, J.C. Nelson, E.T. Lilleodden, P. Anderson and J.T. Wyrobek, “Indentation induced dislocation nucleation: the initial yield point”, Acta Materialia, vol. 44 (1996) pp. 3585-‐3598.
- E.T. Lilleodden, W. Bonin, J. Nelson, J.T. Wyrobek and W.W. Gerberich, "In situ imaging of μN load indents into GaAs”, Journal of Materials Research, vol. 10 (1995) pp. 2162-‐2165
Peer Reviewed Proceedings
- E. Lilleodden, J. Mosler, M. Homayonifar, M. Nebebe, G. Kim, N. Huber “Deformation Behavior of Mg from Micromechanics to Engineering Applications”, in Magnesium Technology 2011 (eds W. H. Sillekens, S. R. Agnew, N. R. Neelameggham and S. N. Mathaudhu), John Wiley & Sons, Inc., Hoboken, NJ, USA.
- Gyu Seok Kim, Sangbong Yi, Yuanding Huang, Erica Lilleodden, “Twining and Slip Activity in Magnesium <11-‐20> Single Crystal”, in Mechanical Behavior at Small Scales — Experiments and Modeling, edited by J. Lou, E. Lilleodden, B. Boyce, L. Lu, P.M. Derlet, D. Weygand, J. Li, M.D. Uchic, E. Le Bourhis (Mater. Res. Soc. Symp. Proc. Vol. 1224, Warrendale, PA, 2010), 1224-‐FF05-‐03.
- T. Smorodin, J. Wilde, P. Nelle, E. Lilleodden, M. Stecher, "Modeling of DMOS subjected to fast temperature cycle stress and improvement by a novel metallization concept," in the Proceedings of the Reliability Physics Symposium 2008. IRPS 2008. IEEE International, pp. 689-‐690.
- A. A. Zbib, S. Dj. Mesarovic, D. F. Bahr, E. T. Lilleodden, J. Jiao and D. McClain, ”Indentation response of nanostructured turfs”, Materials Research Society Symposium Proceedings, Fundamentals of Nanoindentation and Nanotribology IV (Ed. E. LeBourhis, D.J. Morris, M.L. Oyen, R. Schwaier, T. Staedler), vol. 1049 (2008) pp. 15-‐20.
- K.R. Magid, E.T. Lilleodden, N. Tamura, J. Florando, D. Lassila, R. Barabash and J.W. Morris, Jr., “X-‐ray Microdiffraction Characterization of Deformation Heterogeneities in BCC Crystals”, Materials Research Society Symposium Proceedings, Neutron and X-‐Ray Scattering as Probes of Multiscale Phenomena, vol. 840 (2005) pp. 181-‐186.
- A.M. Minor, E.T. Lilleodden, E.A. Stach and J.W. Morris, Jr., “A method for extracting quantitative data during in situ nanoindentation”, Materials Research Society Symposium Proceedings, vol. 695 (2002) pp. 165-‐170.
- A.M. Minor, E.T. Lilleodden, E.A. Stach and J.W. Morris, Jr., “Observations of surface-‐related phenomena during in situ nanoindentation in a transmission electron microscope (TEM)”, 2002 TMS Annual Meeting Symposium Proceedings, Surface Engineering: Science and Technology II (Ed. A. Kumar, Y.W. Chung, J.J. Moore, G.L. Doll, K. Yatsui, D.S. Misra), (2002) pp. 305-‐313.
- E.T. Lilleodden, J.A. Zimmerman, S.M. Foiles and W.D. Nix, “An experimental and computational study of the elastic-‐plastic transition in thin films”, Materials Research Society Symposia Proceedings, Dislocations and Deformation Mechanisms in Thin Films and Small Structures, vol. 673 (2001).
- A.V. Zagrebelny, E.T. Lilleodden, and C.B. Carter, “Effect of glass composition on mechanical properties of interfaces between alumina and silicate glass,” Materials Research Society Symposium Proceedings, Interfacial Engineering for Optimized Properties (1997). pp. 179-‐ 184.
- A. Lundkvist, E. Lilleodden, W. Siekhaus, J. Kinney, L. Pruitt, and M. Balooch M., “Viscoelastic properties of healthy human artery measured in saline solution by AFM-‐based indentation technique, ” Materials Research Society Symposium Proceedings, Thin Films: Stresses and Mechanical Properties VI (1997) pp. 353-‐358.
- A. Strojny, E.T. Lilleodden, G. Wang, J.V. Sivertsen, and W.W. Gerberich, “Effect of film thickness and substrate surface treatment on substrate deformation: DLC on MgO”. Materials Research Society Symposium Proceedings, Thin Films: Stresses and Mechanical Properties VI (1997) pp. 281-‐286.
- E.T. Lilleodden, A.V. Zagrebelny, S. Ramamurthy, and C.B.Carter, “Probing silicate/sapphire interfaces with AFM and nanoindentation” Materials Research Society Symposium Proceedings, Thin Films: Stresses and Mechanical Properties VI (1997) pp. 177-‐182.
- S.G. Corcoran, R.J. Colton, E.T. Lilleodden, and W.W. Gerberich, “Nanoindentation studies of yield point phenomena on gold single crystals” Materials Research Society Symposium Proceedings, Thin Films: Stresses and Mechanical Properties VI (1997) pp. 159-‐164.
- A.V. Zagrebelny, J.C. Nelson, E.T. Lilleodden, S. Ramamurthy, and C.B. Carter, “Alumina-‐ silicate glass interfacial properties probed by micromechanical testing techniques” Materials Research Society Symposium Proceedings, Epitaxial Oxide Thin Films II (1996) pp. 103-‐108.
- W.W. Gerberich, E.T. Lilleodden, T.J. Foecke and J.T. Wyrobek, “Dislocation mechanics of point forces”, Proceedings of Micromechanics of Advanced Materials (1995) pp. 29-‐35.
- W.W. Gerberich, S. Venkataraman, J. Nelson, H. Huang, E. Lilleodden, and W. Bonin, “Yield point phenomena and dislocation velocities underneath indentations into BCC crystals” Materials Research Society Symposium Proceedings, Thin Films: Stresses and Mechanical Properties V (1995) pp. 629-‐44.
- R.O. Ritchie, R.H. Dauskardt, W.W. Gerberich, A. Strojny and E.T Lilleodden, “Fracture, fatigue and indentation behaviour of pyrolytic carbon for biomedical applications”,Materials Research Society Symposia Proceedings, Mechanical Behavior of Diamond and Other Forms of Carbon (1995) pp. 229-‐254.
- M.P. de Boer, H. Huang, J.C. Nelson, E.T. Lilleodden and W.W. Gerberich, “Cracking mechanisms of fine lines by microwedge scratch testing” Materials Research Society Symposium Proceedings, Materials Reliability in Microelectronics IV (1994) pp. 513-‐18.